TAP AND SINK PROTECTION SET
PACKAGE CONTENT:
- Nano coating Tap and Sink (50 ml) - it is a water and dirt repellent coating for metal taps and sinks;
- Cleaner Surface Prepare (50 ml) - concentrated cleaner, used to prepare the surface before using nano coatings;
- non-woven fiber cloth (2 pcs.).
NANO COATING TAP AND SINK
It is a water repellent coating for metal taps and sinks. Repels water and grease. Surface provides long lasting easy cleaning effect. The protective coating is non-slip and invisible.
PROPERTIES:
- Repels water and dirt;
- Surface remains clean for much longer;
- Coating is non-slippery and invisible.
COVERED AREA: 50 ml for 10 m2, depending on the surface.
CLEANER SURFACE PREPARE
It is concentrated cleaner, used to prepare the surface before using nano coatings. Cleaner removes oil and cleans the surface. It is suitable for all not wetting surfaces (e.g. glass, plastic, painted and varnished surfaces etc.).
PROPERTIES:
- Concentrated cleaner;
- Removes fat and cleans the surface.
COVERED AREA: 50 ml for 10 m2, depending on the surface.
USAGE:
- Surface has to be clean, dry and grease free. Spray Surface Prepare on the surface and wipe it with cloth. Wait until the surface gets dry;
- Shake well before using Tap and Sink;
- Buff Tap and Sink into the surface with application cloth, wait for 5 minutes and then polish the surface with cloth;
- Avoid contact with water for 4 hours.
CAUTION! Application temperature has to be +5 °C - +30 °C. Keep container tightly closed, protected from direct sunlight and frost. Application area should be ventilated well. May cause eye irritation. Keep out of reach of children. Use in a well ventilated area.
