SURFACE PROTECTION HOME CARE SET

This set of products designed to protect plastic, metal, leather and suede leather surfaces from liquids, oil and other dirt. All coatings in the set are invisible on the surface and long lasting.

PACKAGE CONTENT:

• Plastic and metal (50 ml) - hydrophobic nano-coating for plastic and metal, which repels water and grease. Surface provides "easy to clean effect";
• Leather (100 ml) - nano coating for leather, which protects, enhances color and makes leather softer;
• Shoes protect (100 ml) - nano coating for suede leather makes surface resistant to liquids and oil;
• non-woven fiber cloth (2 pcs.);
• microfiber cloth.

PLASTIC AND METAL, 50 ml

It is hydrophobic coating for plastic and metal. Repels water and grease. Surface provides "easy to clean" effect.

PROPERTIES:

• Repels water and dirt;
• Surface remains clean for much longer;
• Coating is non-slippery and invisible.

USAGE: The surface has to be clean, dry and grease free. Buff coating into the surface with application cloth, wait for 5 minutes and then polish the surface with cloth. Avoid contact with water for 4 hours.

CAUTION! Application temperature must be +5 °C - +30 °C. Application area should be ventilated well. Keep container tightly closed, protected from direct sunlight and frost. May cause eye irritation. Keep out of reach of children.

COVERED AREA: 50 ml for 10 m2, depending on the surface.

Together with product there is special non-woven fiber cloth, for coating application.

LEATHER, 100 ml

GIVES A NATURAL SHINE

Nano coating for leather is designed to protect and soften leather, refresh color, improve the hydrophobic effect and protect against moisture and dirt. The product is water-based and odorless. Coating renews surface and gives it a natural shine.

PROPERTIES:

• Nano coating refreshes the surface and gives a natural shine;
• Provides water repellancy;
• Protects leather surfaces against moisture and dirt.

USAGE: The surface has to be clean, dry and grease free. Shake well before using. Spray on the surface and spread evenly with cloth. Wait until the surface gets dry or at least 1 hour. Polish with cloth if necessary.

CAUTION! Application temperature must be +5 °C - +30 °C. Keep container tightly closed, protected from direct sunlight and frost. May cause eye irritation. Keep out of reach of children.

COVERED AREA: 100 ml for 5-10 m2, depending on the surface.

Together with product there is special non-woven fiber cloth, for coating application.

SHOES PROTECT SUEDE LEATHER, 100 ml 

PROTECTION FROM WATER AND STAINS

Nano impregnator for suede leather makes surface water and oil repellent.  Coating very well suits for impregnating footwear and protecting it from any dirt. Impregnated surface remains air breathable. Coating does not change color of surface.

PROPERTIES:

• Protects the surface from fluid and oil penetration;
• The surface remains breathable;
• It does not change the color of surface;
• It does not contain silicone, so the coated surface appears dull and does not have a wet surface effect;
• It is completely odorless.

USAGE: The surface has to be completely clean, dry and grease or oil-free. Shake well and spray evenly until the surface becomes wet. Wait until surface gets dry or at least 4 hours.

CAUTION!  Application temperature must be +5 °C - +30 °C. Keep container tightly closed, protected from direct sunlight and frost. May cause eye irritation. Keep out of reach of children.

COVERED AREA: 100 ml for 2-4 pairs of shoes.