HC103 hydrophobic IMPREGNATOR of mineral surfaces

Coating is designed for surfaces that are not dyed, such as, concrete, tiles, clinker, sandstone and natural stone, to protect from graffiti drawings. 

HC103 hydrophobic IMPREGNATOR is the aqueous fluorine silane system, which provides porous mineral surfaces with hydrophobic and oleophobic qualities. After coating the wall with HC103 hydrophobic IMPREGNATOR, sprayed paint begins to shrink not allowing the drawing to appear. The paint is easily cleaned from the wall using solvents of paint (Graffiti Remover) and high pressure water jet.

Qualities:

• Coating is invisible, it does not change the color of the surface, it does not shine and there is no “wet surface” effect on the wall.
• It repels water, grease, oil and solvent based paints from porous mineral surfaces of buildings.
• Creates air-permeable, hydrophobic and oleophobic coating.
• Provides the surface with durable protection; the coating withstands 3 or more graffiti attempts (no need to apply the product again after cleaning).

Preparation of the surface and usage of the product: product is applied with multiple layers. The output depends on the absorption of the surface. It can be 100-300ml/m2. The coating withstands 3 or more graffiti attempts (no need to apply the product again after cleaning). After coating the wall with HC103 hydrophobic IMPREGNATOR, sprayed paint begins to shrink not allowing the drawing to appear.

The paint is easily cleaned from the wall using solvents of paint and high pressure water jet. It is recommended to use the low pressure sprayer, roller or use soaking method.

Covered area: 3-10m2/l depending on the absorption of the surface, since the coating is applied in several layers.