HELMET PROTECTION SET
PACKAGE CONTENT:
- Nano coating Helmet (50 ml) - it is a water and dirt repellent coating for plastic helmets and goggles;
- Cleaner Surface Prepare (50 ml) - concentrated cleaner, used to prepare the surface before using nano coatings;
- non-woven fiber cloth (2 pcs.).
NANO COATING HELMET
It is water repellent coating for plastic helmets, which repels water and dirt. Surface provides long lasting and “easy to clean” effect. The protective coating is non-slip and invisible. It is suitable for motorcyclist helmet and goggles.
PROPERTIES:
- Repels water and dirt;
- Surface remains clean for much longer;
- Coating is non-slippery and invisible.
COVERED AREA: 50 ml for 10 m2, depending on the surface.
CLEANER SURFACE PREPARE
It is concentrated cleaner, used to prepare the surface before using nano coatings. Cleaner removes oil and cleans the surface. It is suitable for all not wetting surfaces (e.g. glass, plastic, painted and varnished surfaces etc.).
PROPERTIES:
- Concentrated cleaner;
- Removes fat and cleans the surface.
COVERED AREA: 50 ml for 10 m2, depending on the surface.
USAGE:
- Surface has to be clean, dry and grease free. Spray Surface Prepare on the surface and wipe it with cloth. Wait until the surface gets dry;
- Shake well before using Helmet;
- Buff Helmet into the surface with application cloth, wait for 5 minutes and then polish the surface with cloth;
- Avoid contact with water for 4 hours.
CAUTION! Application temperature has to be +5 °C - +30 °C. Keep container tightly closed, protected from direct sunlight and frost. Application area should be ventilated well. May cause eye irritation. Keep out of reach of children. Use in a well ventilated area.
